Sneak peak at the completed build. Will have the "Final" pictures up within the next day or so. Until then, put together a little video showing the process of adding the Mayhem Blue Pastel concentrate to the hardline tubing loop.
I have a new post and video with a lot more detail around a new System Display panel I just installed. http://mrarmageddon.blogspot.com/2017/01/pc-upgrade-mounted-system-stats-display.html
Years later, I still find your P5 build to have set the bar - thanks for being as detailed in your build logs as you have been - helps a lot when considering HW similar to yours. Quick question, would it have been possible to route the vertical tube next to the rad through the back panel of the case? Is there enough clearance?
What is the thermal management panel on the bottom left?!
ReplyDeleteCheck out this post in how I put that together. Also has a link to purchase the screen.
Deletehttp://mrarmageddon.blogspot.com/2016/06/project-open-core-hardware-system.html
I have a new post and video with a lot more detail around a new System Display panel I just installed.
Deletehttp://mrarmageddon.blogspot.com/2017/01/pc-upgrade-mounted-system-stats-display.html
Years later, I still find your P5 build to have set the bar - thanks for being as detailed in your build logs as you have been - helps a lot when considering HW similar to yours. Quick question, would it have been possible to route the vertical tube next to the rad through the back panel of the case? Is there enough clearance?
ReplyDeleteThere is enough space in the case to do that, but sliding a long piece of tubing with bends through 2 cutouts would be difficult.
Delete